SIIG FireWire 800 ExpressCard, Quick Installation Manual

Page: 5 / 12

5
32-bit Windows Server 2003
Windows Server 2003 automatically installs it's
built-in FireWire 400 driver for the FireWire 800 2-Port
ExpressCard/34 . To get the full speed out of this controller ,
install the FireWire 800 driver using the directions below
1.
Insert the driver CD. Click Start , Run . Type
D:\setup32.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .
3. At the License Agreement screen, click Yes .
4. At the Destination Location screen, click Next .
5. Select Complete , then click Next .
6. At the Program Folder screen, click Next .
7. At the Security Alert box, click Yes two times.
8. At the Software Installation screen, click Continue
Anyway , then click Finish .
9. Select the restart Windows option, then click Finish .
64-bit Windows Server 2003
Windows Server 2003 automatically installs it's
built-in FireWire 400 driver for the FireWire 800 2-Port
ExpressCard/34 . To get the full speed out of this controller ,
install the FireWire 800 driver using the directions below.
1.
Insert the driver CD. Click Start , Run . Type
D:\setup64.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .
3. At the License Agreement screen, click Yes .
4. At the Destination Location screen, click Next .
5. Select Complete , then click Next .
6. At the Program Folder screen, click Next .