4
5.
Carefully align the card's bus connector
with the selected PCI Express slot on the
motherboard. Push the board down firmly,
but gently, until it is well seated.
6.
Replace the slot bracket holding screw to
secure the card.
Windows Installation
Follow the instructions below to install the
DP
eSATA 6Gb/s 2-Port PCIe
adapter drivers.
Windows 8 (32-/64-bit) / Server 2012
The driver is built-in to Windows 8 and Windows
Server 2012. No extra driver installation is needed.
For New Installation
1.
Install the board and follow Microsoft
procedures to install Windows accordingly.
2.
Reboot Windows. The
DP eSATA 6Gb/s 2-
Port PCIe
is ready for use.
For Existing Installation
1.
Install the board and boot up Windows.
2.
The
DP eSATA 6Gb/s 2-Port PCIe
is ready
for use.
