7
NOTICE
1. In HDMI bypass mode, users must be aware of that the jitters
coming from HDMI sources, such as DVD players, may be much
higher than typical requirement according to SMPTE request on
HD-SDI signals. This will result in SDI output with high jitters or
even no SDI outputs!
2. Due to the high frequency bandwidth and low jitter requirement
of 3G-SDI signals, it is strongly recommended to use just one SDI
OUTPUT with one 75 ohm.
3. The features including new timings and patterns may increase
without notice after the firmware is updated! This may affect the
menu items, but will keep the same framework for users!
APPENDIX
•
Data Identification Word of Ancillary Data Packet
* Data Type 1(SMPTE-291M)
ANC Data
DID
SDID/DBN
352M
0x41
0x01
RP-165-EDH*
0xF4
0x00
