background image

3

, -

:  Increases or decreases the system

volume.  This feature works in analog mode only.

Headphone/Speaker Out

:  Connect headphones

or stereo speakers via mini-3.5mm stereo plug.

Doubles as an Optical S/PDIF pass-through when

connecting with the S/PDIF Optical Adapter.

Volume Mute

:  Press this button to turn off the

system sound.  Press the button again to turn on the

system sound, pause for several seconds between

button presses.  This button works in analog mode

only.

Microphone Mute

:  Press this button to turn off the

microphone jack.  Press the button again to turn on

the microphone jack.

Microphone Jack

:  Use this jack to connect MP3

players, CD players, iPods and other audio output

devices for playback or recording, connect a

microphone and turn your system into a P.A. or

Karaoke system.  This jack works in analog mode

only.

Power/Activity LED

:  The light will be on when the

system is powered up.  The light will blink when

activity is detected, however, the light is not affected

by microphone jack inputs.

Microphone LED

:  When the microphone jack is

muted, the light will turn on.

USB Connector

:  Plugs into the system's USB port.

Summary of Contents for CE-S00022-S1









Reviews: