8
EDID Learning
EDID is used to transmit the make, model and
characteristics of a monitor to the display adapter
in the computer. It also used by an HDTV to
identify it's maximum resolution to the DVD
player, A/V receiver or video processor.
1.
Power off the transmitter, see
Figure 1
.
Disconnect the CAT5/5e/6 between the
receiver and transmitter.
2.
Connect an HDMI cable from the
HDMI IN
connector to the display’s HDMI connector.
Do not connect the HDMI source device at this
time
.
3.
Set the
Mode
on the transmitter at 7.
4.
Power on the transmitter. The LED on the
HDMI Signal OUT
see
Figure 2
, will dim
and light again, which indicates the EDID
learning process is finished.
5.
Turn the
Mode
dial clockwise from 7 to 0 or
1. Don’t let the rotary arrow passes through
6, which will erase the EDID just learned
and restore to default EDID.
