SIIG CE-DV0031-S1, Quick Installation Manual, Page: 7 / 12

7
We suggest you connect the monitor with the lowest resolution to the DVI-OUT 1.
(E.g. Suppose monitor A might support a maximum resolution of 1920 x 1200,
monitor B supports a maximum resolution of 1280 x 1024 and monitor C supports a
maximum resolution of 1024 x 768, please connect monitor C to DVI-OUT 1) .
Unless you would like to use the default universal EDID, please set DIP switch 2 at off
position, which allows the 3-Port DVI Splitter to read the first connected monitor’s
EDID.
1. Single Device
2. Mutiple devices- cascading
Hardware Installation
1. Connect a monitor, a projector or other displays with DVI input by a
male-to-male DVI cable to the first 3-Port DVI Splitter DVI-OUT 1.
2. Plug DVI Y-cable into 3-Port DVI Splitter DVI-OUT 2 and then plug in power
adapter.
3. Connect the second display to the DVI female connectors of the long line of the
Y-cable and plug in the short line of the Y-cable to the DVI-IN of the second
3-Port DVI Splitter.
4. Connect the third display to the DVI-OUT 1 of the second 3-Port DVI Splitter .
5. Follow from step 2 to step 4 for cascading the remaining devices.
6. Connect a PC or other devices with DVI outputs to the first 3-Port DVI Splitter
DVI-IN.
1. Connect a monitor, a projector or other displays with DVI inputs by a
male-to-male DVI cable to 3-Port DVI Splitter DVI-OUT 1.
2. Plug DVI Y-cable into 3-Port DVI Splitter DVI-OUT 2
3. Connect the second and third displays to the DVI female connectors of the
Y-cable.
4. Plug power adapter cable into 5V DC jack.
5. Connect a PC or other devices with DVI outputs to DVI Splitter DVI-IN.