4
•
CH (+, -): channel up/down or menu up/down
•
VOL (+, -): volume up/down or menu left/right
•
ENTER: confirms the menu settings
•
SOURCE: switches between TV or external video
sources
•
MUTE: turns sound On or Off
•
16:9/SCREEN: switches between 16:9 and 4:3 aspect
ratio
•
SLEEP: sets sleep mode (10min, 60min, 90min, off)
•
SCAN: scans TV channels
•
AUDIO: bilingual sound
•
FAVORITE: calls up favorite channels
•
MEMORY: adds/deletes favorite channels
Hardware Installation
1.
Connect the coaxial cable from your antenna/cable/
satellite TV to the Tuner In connector, and/or any
other video sources, such as DVD player, VCR, or
DV camcorder, utilizing the S-Video, Composite
video and left/right audio inputs on the front panel
(see Figure 1 on page 2 for more information).
2.
Connect the VGA extension cable to the VGA In of
the AVTuner Pro, then connect the other end to the
VGA output of the computer.
3.
Connect the monitor's VGA connector to the Monitor
jack of the AVTuner Pro.
4.
Skip this step if the AVTuner Pro and your PC will use
separate speaker systems. Plug one end of the 3.5mm
stereo cable into the Line In of the AVTuner Pro,
then plug the other end into Speaker out/Line out
port of the computer's sound card.
