8
Method B: Software Operation
System Requirement and Precautions
1.
Whenever power off AV-GM0A43-S1, please stay unpowered at least 5 to 10 seconds to allow
power capacitors to discharge.
2.
The AV-GM0A43-S1 provides software control program which runs under Microsoft Windows 98,
2000, XP, 7 through the interface of USB virtual com control.
3.
Before you click on the icon of the software, make sure you have secured the connection
between your computer USB port and the AV-GM0A43-S1.
Start the software control program
When clicking on the executable file, the following dialog will pop-up. It has two ways to control the
AV-GM0A43-S1 device (under Microsoft Windows 7, please run as administrator).
USB Mode: Use USB to connect the port on device and computer. Select correct virtual Com port
and click the OK button.
Ethernet Mode: Enter the device IP address and click the OK button.
After the software control setting is accomplished, it will enter directly to control interface.
