6
HARDWARE INSTALLATION
Connect your SDI/CVBS video sources to the input connectors.
1.
Connect your HDMI enabled monitors into the device’s HDMI output port.
2.
Power up the AV-GM09C3-S1.
DEFAULT SETTING
1.
Power up the AV-GM09C3-S1.
2.
To reset AV-GM09C3-S1 back to the factory default values, pull up-and-down the DIP switch 1&2
from OFF to ON to complete the process. You NEED to pull back the DIP switch back to OFF in
order to get AV-GM09C3-S1 work normally.
FIRMWARE UPDATE PR
Software Interface:
ComPort Settings:
Select ComPort of PC
connected to the device.
Push
“auto scan” to start the
automatic scan on each
ComPort.
