7
Full screen layout 4
Window 4 in full screen
Method B: Software Control through RS-232 port / Ethernet port
System Requirement and Precautions
1.
Whenever power off AV-GM08W3-S1, please stay unpowered at least 5 to 10 seconds to
allow power capacitors to discharge.
2.
The AV-GM08W3-S1 provides software control program which runs under Microsoft
Windows 98, 2000, XP, 7, 8 through the interface of RS-232 serial control.
3.
Before clicking on the icon of the software, make sure you have secured the connection
between your computer COM port and the AV-GM08W3-S1.
Start the software control program
When clicking on the executable file, the following dialog will pop-up. There are two ways to
control the AV-GM08W3-S1 device (under Microsoft Windows 7, please run as
administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct
COM port and click the OK button.
Ethernet Mode: Enter the IP address of the device and click the OK button.
After the software control setting is accomplished, it will enter directly to control interface.
