background image

 

 
 
 

This  AV-GM08G3-S1  receives  and  amplifies  up  to  8  VGA  inputs,  perfectly  switches  the 

desired  input  to  the  VGA  equipped  monitor  or  receiver.  This  matrix  enables  the  broadcast  of 
multiple computers’ audio and video outputs to multiple displays. Any one of the inputs can be 
broadcasted to any or all of the outputs without introducing noticeable video quality distortion. 
The matrix supports VGA video bandwidth up to 400MHz and also supports YPbPr component, 
S-Video,  and  Composite  signals.  The  re-transmitted  video  and  audio  quality  is  guaranteed! 
AV-GM08G3-S1  offers  the  most  convenient  and  cost  effective  means  for  swift  switch  of  high 
quality PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio 
matrix,  AV-GM08G3-S1  is  ready  to  be  as  YPbPr  matrix  with  stereo  audio  and  ideally  for 
boardroom, showroom, and exhibition. Through IR remote, RS-232, Ethernet or front panel push 
button, the control of AV-GM08G3-S1 becomes versatile and easier.   
 

Features 

 

Power-fail protection, allows switcher to restore previous settings 

 

RS-232  communication  control  input,  allows  to  control  switcher  via  included  advanced 
control software or third party control system 

 

Breakaway audio with volume control 

 

IR remote control   

 

Ethernet accessible   

 

Front panel button control 

 

Inputs: 8 x VGA female15-pin HD, 8 x 1/8'' (3.5mm) mini audio 

 

Outputs: 8 x VGA female 15-pin HD, 8 x 1/8'' (3.5mm) mini audio 

 

Connectors:  15-pin  HD  (could  be  used  for  PC  resolutions  up  to  WUXGA  —  1920x1200  or 
HDTV up to 1080p) 

 

Compatible formats: RGB, YPbPr or RGBHV 

 

1RU Rack mountable 

 

 
*

 Appropriate adapters are necessary for video inputs, such as component, composite and 

S-Video.

 

 

Introduction

 

Summary of Contents for AV-GM08G3-S1


















Reviews: