background image

 

10

 

WARRANTY 

The SELLER warrants the AV-GM06B3-S1 

2x8 HDMI Splitter/Repeater over Cat.X with Local Out

 

free from defects in the material and workmanship for 3 years from the date of purchase from the 
SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years 
warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not 
been  subjected  to  accident,  disaster,  abuse  or  any  unauthorized  modifications  including  static 
discharge  and  power  surge.  This  warranty  is  offered  by  the  SELLER  for  its  BUYER  with  direct 
transaction only. This warranty is void if the warranty seal on the metal housing is broken. 

Unit that fails under conditions other than those covered will be repaired at the current price of 

parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day 
of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or 
assume  the  risk  of  loss  or  damage  in  transit.  Under  no  circumstances  will  a  unit  be  accepted 
without a return authorization number. 

The  warranty  is  in  lieu  of  all  other  warranties  expressed  or  implied,  including  without 

limitations, any other implied warranty or fitness or merchantability for any particular purpose, all 
of which are expressly disclaimed. 

Proof  of  sale  may  be  required  in  order  to  claim  warranty.  Customers  outside  Taiwan  are 

responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to 
a 30 day warranty and must be free from any markings, scratches, and neatly coiled. 

The content of this manual has been carefully checked and is believed to be accurate. However, 

The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. 
The  SELLER  will  NOT  be  liable  for  direct,  indirect,  incidental,  special,  or  consequential  damages 
resulting  from  any  defect  or  omission  in  this  manual,  even  if  advised  of  the  possibility  of  such 
damages.  Also,  the  technical  information contained  herein  regarding  the  AV-GM06B3-S1 features 
and specifications is subject to change without further notice.   

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
April, 2018 

 

Support 

For more info or tech support 

http://www.siig.com/support 

Summary of Contents for AV-GM06B3-S1













Reviews: