1
INTRODUCTION
The AV-GM02J3-S1
HDMI over Coaxial Extender with Bi-directional IR Pass-through
boosts up
your HDMI transmission range up to 100m (330ft) in HDTV 1080p format. AV-GM02J3-S1 is easy to
install and works perfectly with the RGBHV or RG-6 coaxial cables. Coaxial cables are typically used
for VGA or component signals, and provide the audio/video professionals with remarkable
flexibility. Built with IR pass-through extension, users can control the remote HDMI source devices
such as Blu-ray Disc players instantly at the display site. Embedded with bi-directional HDCP
mechanism, high definition HDMI content is secured from piracy.
The AV-GM02J3-S1 includes two units: transmitting (AV-GM02J3-S1-TX) and receiving
(AV-GM02J3-S1-RX) units. The transmitting unit is used to capture the HDMI/DVI, HDCP and IR input
signals and carry the signals through five coaxial cables. The receiving unit is responsible for
equalizing the transmitted HDMI multimedia data and extracting HDCP and IR data. The
transmission range between the sending and receiving units can be up to 100m (330ft) under Full
HD (1080p) with 7.1 channel audio. With AV-GM02J3-S1 installation, current analog A/V based
distribution systems can be upgraded to become pure high quality and future-proof HDMI
supported system cost effectively.
FEATURES
●
Support HDMI Deep Color and DVI 1.0 compliant
●
HDCP 1.1 compliant
●
Supports 7.1-channel DTS-HD Master Audio and Dolby TrueHD high bitrate audio
●
Supports Deep Color x.v.Color (xvYCC)
●
Extends the transmission range up to 100m (330ft) from the HDMI sources under Full HD
resolution (1080p60 36-bit color depth)
●
48-bit color depth
●
Supports embedded bi-directional IR pass-through and Consumer Electronics Control (CEC)
channel
●
Supports Video resolutions up to WQXGA (2560x1600@60Hz or 1920x1200@75Hz) or HDMI
video up to 1080p@36 bit RGB/YCbCr
●
Supports VESA DDC and Hot-Plug Detect (HPD)
PACKAGE CONTENTS
●
1x AV-GM02J3-S1 [TX & RX]
●
2x DC 5V 2A power supply
●
1x IR blaster
●
1x IR receiver
The claimed transmission distance here is subject to the grade of installed cable(s), source
device and display.
For over Cat.X/COAX transmission, the cable(s) has to be solid, not stranded. Any keystone
jack along the transmission path will kill the transmission performance significantly!
