background image

11

Technical Support and Warranty

QUESTIONS?

  SIIG

Online Support

 has answers!  Simply visit our web site at

www.siig.com

 and click 

Support

.  Our online support database is updated daily with

new drivers and solutions.  Answers to your questions could be just a few clicks away.  You

can also submit questions online and a technical support analysts will promptly respond.
SIIG offers a 5-year manufacturer warranty with this product.  This warranty covers the

original purchaser and guarantees the product to be free of any defects in materials or

workmanship for five (5) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having

similar features and functionality) the product if defective in materials or workmanship.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.  Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store

where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps

below to have the product repaired or replaced.

Step 1:

  Submit your RMA request.

Go to 

www.siig.com

, click 

Support

, then 

RMA

 to submit a request to SIIG RMA or

fax a request to 510-657-5962.  Your RMA request will be processed, if the product

is determined to be defective, an RMA

 

number

 

will be issued.

Step 2:

  After obtaining an RMA number, ship the product.

Properly pack the product for shipping.  All accessories that came with the

original package must be included.

Clearly write your RMA number on the top of the returned package.  SIIG will

refuse to accept any shipping package, and will not be responsible for a product

returned without an RMA number posted on the outside of the shipping

carton.

You are responsible for the cost of shipping to SIIG.  Ship the product to the

following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S. and

International Economy outside of the U.S. at no cost to the customer.

Summary of Contents for 2.5" USB 2.0 to SATA Enclosu













Reviews: