background image

1S1P mini PCIe with 16950 UART is a trademark of SIIG, Inc.  SIIG and the SIIG logo are registered

trademarks of SIIG, Inc.  Microsoft  and Windows are registered trademarks of Microsoft Corporation.

Other names used in this publication are for identification only and may be trademarks of their

respective owners.

PRODUCT NAME

1S1P mini PCIe with 16950 UART

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules.  Operation is
subject to the following two conditions:  (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone:  510-657-8688

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,

and legacy I/O adapters) that bridge the connection between Desktop/

Notebook systems and external peripherals.  SIIG continues to grow by

adding A/V and Digital Signage connectivity solutions to our extensive

portfolio.  All centered around the distribution and switching of A/V signals

over CAT5/6, these products include matrix switches, distribution amplifiers,

extenders, converters, splitters, cabling, and more.

SIIG is the premier one-stop source of upgrades and is committed to

providing high quality products while keeping economical and competitive

prices.  High-quality control standards are evident by one of the lowest

defective return rates in the industry.  Our products offer comprehensive

user manuals, user-friendly features, and most products are backed by a

lifetime warranty.

SIIG products can be found in many computer retail stores, mail order

catalogs, and e-commerce sites in the Americas, as well as through major

distributors, system integrators, and VARs.

April, 2012                    Copyright ©  2012 by SIIG, Inc. All rights reserved.

Summary of Contents for 1S1P Mini PCIe













Reviews: