SII IP-7700-02, Quick Reference Manual

Page: 49 / 239

The factors that change the media advance correction
values are as follows.
Change of print mode
Pressure change using the pressure control knob
Use/not use of take-up reel unit
Type of media
Difference in media feed route
-
•
•
•
•
•
1
Set media longer than 4 m.
Find the rough media advance correction value in
[ROUGH] and determine the media advance correction
value in [DETAIL]. Both [ROUGH] print and [DETAIL]
print need paper of about 90 cm in length for one-time
print. (To cancel printing of media advance correction
pattern, press the
CANCEL
key.
2
Set the printer to the offline mode.
(Press the
O N L I N E
key.)
á
I N K M E D I A R E G
â
ß
M E D I A M . A D V
à
3
Press the key and then key to display the
media advance correction pattern.
# M E D I A A D V P R I N T
> R O U G H ( N O R M A L 1 )
Select the print mode to be used normally for the
media to set the media advance value.
Note
To obtain the media advance correction value in DENSITY2 mode,
apply the media advance correction patterns, ROUGH(QUALITY)
or DETAIL(QUALITY). -
4
Select the rough print mode with the and
keys, and press the key.
# M E D I A A D V P R I N T
* O K ?
5
Press the key. Then the media advance
correction pattern [ROUGH] is printed in the
selected print mode.
# M E D I A A D V P R I N T
* E X E C U T I N G
6
Select a rough media advance correction value
from the print result.
Nine patterns are printed with 0.5% increments within
a range of 99.00% to 101.00%. Select a rough media
advance correction value from them.
7
Press the key and then the key to display
the media advance correction value.
# M E D I A A D V V A L U E
> 0 1 : 0 9 9 . 8 0 %
8
Enter the media advance correction value and
press the key.
Align the digit with the and keys and set the
value with the and keys.
9
Press the key and then the key to display
the media advance correction pattern.
# M E D I A A D V P R I N T
> R O U G H ( N O R M A L 1 )
10
Select the detail print mode with the and
keys.
Select the same print mode as for [ROUGH].
# M E D I A A D V P R I N T
> D E T A I L ( N O R M A L 1 )
11
Press the key twice to print the media
advance correction pattern [DETAIL].
# M E D I A A D V P R I N T
* E X E C U T I N G
12
Select the detail media advance correction
value from the print result.
Five patterns are printed for the entered rough media
advance correction value with 0.1% increments within
a range of -0.20% to +0.20%. Select an appropriate
media advance correction value from them.
13
Press the key and then the key to
display the media advance correction value.
# M E D I A A D V V A L U E
> 0 1 : 0 9 9 . 8 0 %
14
Enter the determined media advance
correction value and press the key.
Align the digit with the and keys and set the
value with the and keys.
15
Press the key to return to the offline state.
Setting media advance correction values