87
To assist your Printer
in operating effectively
Index
Menu tree
Adjust and calibrate
the Printer
Adjust the print linkage before or after automatic cleaning
In the DURING PRINT, automatic cleaning is performed even while the Printer is printing. In such a case, after the
cleaning, adjust the position of the linkage for the prints before and after the cleaning.
Enter the adjustment value based on the media back feed adjustment pattern.
Before this adjustment, set the cleaning mode to the DURING PRINT at MEDIA REG MENU.
■
Procedure
STEP 1 Print [BACK ADJ PRINT] adjustment pattern.
1
á
I N K
M E D I A R E G
â
ß
M E D I A M . A D V
à
Set the Printer to offline state and press the
key.
2
# S I N G . A D V
# E X E C U T E >
,
Select [BACK ADJ PRINT] with the
,
key.
3
# B A C K A D J P R I N T
# E X E C U T E >
Press the
key.
4
# B A C K A D J P R I N T
# E X E C U T E >
,
Select the print mode with the
,
key.
5
# B A C K A D J P R I N T
# P R I N T M O D E > N O R M A L
Press the
key.
6
# B A C K A D J P R I N T
# P R I N T M O D E
[
MAX SPEED
,
,
Select the print pattern with the
,
key.
Press the
key to confirm.
7
# B A C K A D J P R I N T
# P R I N T M O D E > MAX SPEED
,
Set smart pass with the same procedure.
Select [EXECUTE] with the
,
key.
8
# B A C K A D J P R I N T
# E X E C U T E >
Press the
key.