6-20
ESC 'O'
Cancel Bottom Margin
Code 1BH
4FH
Function Cancels bottom margin.
If the page length is not specified in the initial state in the Roll Paper mode, this command is
ignored.
Default
The bottom margin is canceled.
ESC 'Q' n
Set Right Margin
Code
1BH 51H n
1
n
255
Function Sets the right margin at n columns from the left edge (first column).
Column n (current character pitch x n) from the left edge becomes the right margin.
The character width includes character spacing. The character width is also doubled in
double-width setting. The character width is not calculated by double when Select expanded
character mode with automatic cancellation (SO) command is selecting.
The line buffer data is cleared and the next print position becomes the left margin.
The right margin does not move if the character pitch is changed later.
When n is smaller than the left margin columns, the command is ignored.
If the printable area is one character or less, one character is printed.
This command is ignored in the page mode.
Default
Maximum number of digits for printing. (at shipping)
Printer initial state after power-on can be changed by Set default/Set test print header (DC2 'i')
command.
Printable area
Non-printable area
The defined page
length
The defined bottom
margin
Top of the page
Summary of Contents for DPU-S245
