Installation diagram
（Follow the actual size）
3
4
1
2
1.Screw out the fixings metal at both ends;
2.Insert the hexagon strip into the hexagon hole of the
left and right table legs(When passing through one of
them,the legs pass through the fixings metal at the
same time;)
3.push the fixings metal to both sides and tighten.
Put 4 taper nuts into the table leg link board,and
then use 4 screws M6*30 tighten to the taper
nut(Note: the hole of the table leg link board is
facing forward).
Note：the pasted side of
the table leg faces out.
Use 8 ScrewsM6*14 to install the left and right
table legs on the table board (Keep the table leg
and handle in the same direction).
Note:the pasted
side of the table
leg faces out.
Install the playwood to the shelf back panel with 2
screws and lock handles.
7
8
5
6
1.Install the left and right outer panels with
screws;
2.Install the left and right outer boards to the
bookshelf backboard and large plywood;
3.Tighten each lock handle.
Use 4 screws M6*14 to install the left and right
bookshelf corners on the bookshelf side panel
and tighten.
Put the bookshelf on the desktop and tighten the
bookshelf knob.
1.Use two M4 * 10 screws to install the hook on the
desktop component;
2.Put 2 rubber plugs into the rocker hole, and the
table installation is completed;
(warm tip: when the table needs to be adjusted by
lifting, first take out the rubber plug,then put the
lifting adjustable into the hole)
Warm tip: after the table is installed, please attach the back of
the bookshelf to the wall and install the anti overturning device.
Summary of Contents for H6C
Page 2: ......
