Sigur MR100, Manual

Page: 39 / 52

Sigur MR100 39
6 READER CONNECTION AND
INSTALLATION
1. According to the table below connect the wires of the reader
and the input cable using the supplied ScotchLock
TM
terminals.
2. The terminals are designed for cable with wire diameter
from 0.4 to 0.9 mm.
3. There is no need to strip the wires of their insulation before
connection.
4. Slide the wires home and clamp the terminal with pliers, so that
the colored part is fully inserted into the transparent one.
5. Triple terminals allow the output line to be branched both to the green
LED indicator and to the audio. Or it is possible to combine four wires
of the connection cable into one «common» wire and one +12V wire
to ensure greater connection distance.
6. The wall-mounted panel and the reader are connected with each other
via a bayonet lock. Align the projections of the reader with the notches
in the wall-mounted panel so that the reader is at a lower angle.
7. Press the reader slightly and turn it clockwise until you hear
a distinctive click.