General safety points
Instruction Manual VisGuard 2 Extractive
14265E/1
13
3.2
Residual risk
WARNING!
According to the risk assessment of the applied safety directive DIN EN 61010-1,
there remains the risk of the displayed measuring values being incorrect. This risk
can be reduced with the following measures:
Use an access code to prevent unauthorized persons from changing parameters.
Perform the specified servicing duties.
3.3
Warning and danger symbols on the instrument
WARNING!
There are no warning or danger symbols on the instrument.
Users must ensure that they observe the safety measures as specified in the Instruction Ma n-
ual at all times when working with the instrument and its peripheral equipment, even if no
warning or danger symbols are attached to the instrument.
The following sections must be internalized:
Section 1.8
Section 1.11
Section 1.12
Section 1.13
Section 3.2
Observe safety pointers when performing the described procedures.
Observe local safety pointers.
