Instruction Manual ColorPlus Ex
24
10210E/5
3.7.5
Establish SIREL SMD/Ex electrical connections
For information about control signals, please refer to Section 2 in the
Reference Handbook.
The terminals of the SIREL Ex are located in the lower part of the housing
(Figure 16). The housing must be open in order to connect the electrical
connections
Section 0.
The terminal assignment is identical for the SIREL SMD and SIREL Ex
(
Figure 16: Position of SIREL Ex terminals
Figure 17: Terminal block for SIREL SMD 85..264 VAC.
