Instruction Manual AquaMaster
Mounting and installation
32
12745E/4
4.7
Connecting the electrical connections
DANGER!
Life-threatening voltage inside the instrument:
The system has no mains switch, hence the system is charged with voltage immediately af-
ter being electrically connected.
Cable lengths should be long enough such that during servicing duty there is sufficient
room for movement of the photometer and its peripherals (e.g. fastening the photometer
to the docking station).
Establish the electrical connections in the following sequence:
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Remove the front cover of the AquaScat 2 by
loosening the five screws (circles).
2.
Connect the 12-pin connection cable to the
AquaScat 2.
Usually, the photometer is delivered with
an installed cable.
2.1: Insert the 12-pin cable coming from the
connection box into the cable bushing (Y) and
tighten.
