CHAPTER
2
User Guide
2.1 Initial setup
Cameras are supplied by the manufacturer with the unique
) addresses
already assigned, started with 58-BD-F9, and with one and the same
-
192.168.2.200 - unless it is specied otherwise.
Cameras have stickers on them specifying model, serial number, Ethernet (MAC) address
and bar code with Ethernet (MAC) address.
In special cases, cameras may have stickers on them specifying either the complete
assigned or just the last two
Before putting your camera into operation in your local network, it is necessary to assign
a unique
to each camera.
To do so, you are to connect the camera either directly to your
through an
in case you have a separate power-supply source for your camera or to an
with a
option;
Assign temporarely the IP address 192.168.2.0/24 (subnet mask 255.255.255.0) for the
corresponding
interface, and through your
to go to the camera address
192.168.2.200.
The cameras
interface will automatically redirect
from the port of
unprotected
(80) to the port of protected
(443), and the
will show
information on the untrusted connection. You must agree to the risk of the untrusted
connection nevertheless.
After that, a request for the users name and password will appear. The default username
and password are admin and system, respectively.
In the
, a video in the
format will be shown through
, if the
has been installed.
In the left part of the
, an inserted cameras conguration menu is shown.
13
Summary of Contents for SG-1C-111
