DSL RATE [rrrr|AUTO] | CODE cccc | MASTER | SLAVE - set mode
for DSLx
DSL STAT [RESET] - show statistics for DSL (or clear it)
DSL RETRAIN - force DSL to retrain
:
The
DSL
command allows to view statistics, to enter or to change settings of
the DSL interface.
The command invoked with no option displays current settings of the
interface
: dsl
DSL: Rate=2048 kbit/s Code=TCPAM16 MASTER – OFFLINE
:
3.3.1 “Master”/”slave” mode selection
Configure one peer modem as “master”, do another one as “slave” for
proper operation.
This is performed by the
dsl
command with the
master
or
slave
options:
: dsl master
DSL: Rate=2048 kbit/s Code=TCPAM16 MASTER - OFFLINE
: dsl slave
DSL: Rate=2048 kbit/s Code=TCPAM16 SLAVE – OFFLINE
:
3.3.2 Setting DSL rate
The rate setup is performed by the
RATE rrrr
option (
“
rrrr”
stands for
rate in kbps). The rate is within 64 to 4096 kbps range with 64 kbps step.
The rate should be set the same for both sides:
: dsl rate 64
DSL: Rate=64 kbit/s Code=TCPAM4 MASTER - OFFLINE
: dsl rate 4096
DSL: Rate=4096 kbit/s Code=TCPAM16 MASTER – OFFLINE
:
The line coding mode is also changed accordingly upon the rate change.
See how rates match line coding on Chart 1.
24
