update, default, reboot,
and the interface management commands
such as
dsl
and
eth1/eth2
.
Capabilities of the console management mode allow to configure the DSL
interface as well as to control the Ethernet interfaces. It is also possible to
watch status of the interfaces, etc. The summary of the general
management capabilities can be invoked by the
help
command:
: help
**** Available commands: ****
HELP - display this text
HELP [ETH|DSL|PORT|E1|FXS|FXO] - detailed interface help
INFO - view information about hardware and firmware
STAT [RESET] - show all statistics (or clear it)
ETHx - view or change ETHx settings, x=1,2 (see HELP ETH)
DSL - view or change DSL settings (see HELP DSL)
PORT - view or change PORT settings (see HELP PORT)
E1 - view or change E1 settings (see HELP E1)
FXSx - view or change FXS settings, x=1,2 (see HELP FXS)
FXOx - view or change FXO settings, x=1,2 (see HELP FXO)
UPDATE - update sg16 firmware
DEFAULT - set factory defaults
REBOOT - reboot the modem
:
The SG-16 modems are multi-functional devices with various
types and combinations of system interfaces such as Е1,
V.35, FXO/FXS. Therefore the
help
command displays
commands for each interface available in this firmware.
The
info
command displays information about the firmware version, the
modem uptime, and current status of the modem interfaces.
: info
Sigrand SG-16B SHDSL modem V.2.5
Setup mode: Terminal
23
