16
BACK GUIDE
FRONT GUIDE
OUTER GUIDE
CHANGING SCM STRAP SIZE
The following table illustrates the unique
parts to a particular strap size for the SCM
tool. If the strap size of the tool is to be
changed, this table must be used to
coordinate all the respective parts which
must be reconfigured or replaced.
Follow all specified parts removal,
replacement & adjustment procedures found
in this manual when changing any of the
strap conversion parts.
Do not attempt to convert a tool’s strap
size without replacing/reconfiguring all
of the specified parts for the conversion.
Failure to replace/reconfigure all
required parts may cause severe
personal injury.
UNIQUE PARTS & CONFIGURATION TO SCM STRAP SIZES
KEY
QTY
DESCRIPTION
1/2" (12mm)
5/8" (16mm)
3/4" (19mm)
3
1
Front Guide
424244, Note-1
424244, Note-2
424244, Note-2
2
1
Back Guide
424245, Note-3
424245, Note-4
424245, Note-4
26
1
Outer Guide
424121, Note-5
424121, Note-5
424121, Note-6
63
1
Nameplate
424312
424314
424316
NOTES:
1.
Install guide (Key 3) with text “1/2" facing outward from tool.
