Signode Little David LD16AE 2.0, Operator'S Manual

Page: 6 / 106

Page | 2
OPERATING SAFETY
General Safety Precautions
Before installing, operating or servicing this equipment, read the following precautions
carefully.

This machine is equipped with moving belts. Do not place hands near the rear of this
machine when belts are moving, as fingers may be pinched where belts enter frame. Always
use a roller type exit conveyor and always remove the boxes after they clear the exit end of
the machine.

Observe caution when near cartridge knife or when threading tape. Knife is very sharp,
automatically operated and is linked to the wipe down rollers.

Do not attempt to open or work on electrical box, junction boxes, or other electrical
components without first disconnecting power to the machine. Shock hazard exists if power
is not disconnected.

Do not by-pass any designed-in safety features such as interlocks, guards or shields.

Fully automatic machines are equipped with a rear flap kicker. Do not place any part of the
body near this area without first disconnecting power and air supply.

Do not place hands or body inside confines of random type machines. The side rails and
head operate automatically.

Do not place hands or body inside confines of uniform type machines unless head is
securely locked and power and air are disconnected.

Always disconnect power and air supply (if applicable) before servicing machine.
Chapter
2