15
von 37
V 07.17
Service Manual BXT3-13/16/19
ENGLISH
E34
Supply undervoltage
ESCON Vcc Undervoltage Error (Error
Register Bit1) - Supply only via USB
- Very low batter charge - control unit
defective
No device function
(E2) Error Code, red
backlight,
symbol flashes,
pulsating beep tone,
long
– Let the rechar-
geable battery
cool down
– Replace the
rechargeable
battery
– Replace the
control unit.
E35
Supply overvoltage
ESCON Vcc Overvoltage Error (Error
Register Bit0)
Cancel current process
(E1) Error Code, oran-
ge backlight,
symbol flashes,
pulsating beep tone,
average
In case of repetition
– Replace the
control unit
E36
5 V Supply undervoltage ESCON +5V
VDC Undervoltage Error (Error Register
Bit2)
– Motor Hall sensors / Encoder defective
– Control unit defective
No device function
(E2) Error Code, red
backlight,
symbol & pul-
sating beep tone, long
– Motor / replace
wiring
– Replace the
control unit
E37
End stage overvoltage
ESCON Overcurrent Error (Error Register
Bit4)
– Wiring to the motor defective
– Motor defective
– Control unit defective
Cancel current process
(E1) Error Code, oran-
ge backlight,
symbol & pul-
sating beep tone,
average
In case of repetition
– Motor / replace
wiring
– Replace the
control unit
E38
Hall sensors error
ESCON Hall sensor errors (Error Register
Bit10, 11, 12)
– Wiring to the hall sensors defective
– Motor hall sensors defective
– Control unit defective
No device function
(E2) Error Code, red
backlight,
symbol pulsating
beep tone, long
– Motor / replace
wiring
– Replace the
control unit
E39
Encoder error
ESCON Encoder errors (Error Register
Bit16, 17)
– Wiring to the encoder defective
– Motor encoder defective
– Control unit defective
No device function
(E2) Error Code, red
backlight,
symbol pulsating
beep tone, long
– Motor / replace
wiring
– Replace the
control unit
E40
Internal drive software error ESCON
Internal Software Errors (Error Register
Bit25, 27)
Cancel current process
(E1) Error Code, oran-
ge backlight, pulsating
beep tone, average
In case of repetition
– Replace the
control unit
E41
Internal software error
Internal Application Error (Error Register
Bit26?)
Cancel current process
(E1) Error Code, oran-
ge backlight, pulsating
beep tone, average
In case of repetition
– Replace the
control unit
E42
Display does not detect incorrect display
identification
– Incorrect display print
– Incorrect control print
No device function
(E2) Output not pos-
sible! Pulsating beep
tone, long
– Install correctly
Display Print
– Install correctly
Control Print
E43
Display communication error faulty com-
munication with display
– Poor Flexprint display
– Display defective
– Control unit defective
No device function
(E2) Output not pos-
sible! Pulsating beep
tone, average
– Replace Flexprint
display
– Replace display
– Replace the
control unit
