CA-529-
2019-11-15
Removal of this marking will void the compliance of this heater with
ANSI Z21.11.2.
FOR YOUR SAFETY
READ BEFORE LIGHTING
WARNING: If you do not follow these instructions exactly, a fire
or explosion may result causing property damage, personal injury
or loss of life.
A. This appliance has a pilot which must be lighted using the electronic
ignitor. When lighting the pilot follow these instructions exactly.
B.
BEFORE LIGHTING
smell all around the appliance area for gas.
Be sure to smell next to the floor because some gas is heavier than air
and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do not use any phone in your
building.
•
Immediately call your gas supplier from a neighbor’s phone. Follow
the gas supplier’s instructions
•
If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to push in or turn the gas control knob. Never
use tools. If the knob will not push in or turn by hand, don’t try to repair
it, call a qualified service technician. Forced or attempted repair may
result in fire or explosion.
D. Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance
and to replace any part of the control system and any gas control
which has been under water.
WARNING: Improper installation, adjustment, alteration, service, or
maintenance can cause property damage, personal injury, or loss of life.
Refer to the owner’s information manual provided with this appliance.
Installation and service must be performed by a qualified installer,
service agency, or gas supplier
1