ATTENTION: Install in accordance with national and local building and electrical codes
.
!
Page 2
2a
Arrange boxed fixture on floor in specified mounting location, remove fixtures from boxes. Install all ceiling mounting components and vertical aircraft cables using separate installation instruction for Aircraft
Cable Mounting (supplied).
Cable
Strain
Relief
1
Locking screws
Factory screws
With module
1
on the ground, slide sling cable
assembly into top fixture screw chase on both
ends of the fixture.
Raise fixture to installed level and insert verti-
cal aircraft cable inside sling cable assem-
bly. Ensure end of aircraft cable exits from
sling cable assembly as shown.
Attach #8 sheet metal screws to secure sling
cable assemblies to housing during assembly
process.
Determine power feed location and open ½”
electrical knockout at required end.
Install ½”
bushing from inside fixture as shown. Feed
power cord from above into fixture wiring
cavity.
Install and crimp provided cable metal strain
relief bushing to secure power cord below
fixture reflector. Use the Heyco PN0019(R12)
crimping tool to ensure proper installation. If
installing a standalone fixture, skip to step 13.
1/2”
Bushing
Joiner Biscuits
Joiner Aligners
Fixture
Bracket
With module 2 on the ground, tap biscuit aligners inside top
screw chase. Ensure biscuit aligners are inserted more than
half way inside fixture housing. Insert joiner aligners inside
lower screw chase as shown. Ensure orientation is correct
for locking tab to engage and lock inside fixture bracket.
Level
Adjustment
screw
Remove lens from fixture and set aside until fixture installation is complete. Use cotton gloves
to handle lenses and keep in a clean environment.
Note:
Do not mix symmetric fixture lenses
with asymmetric fixture types as they are different.
Sling cable assembly
1/2”
Bushing
Symmetric Cross Section
Asymmetric Cross Section
Direction of light
Direction of light
Vertical Aircraft
Cable
2b
3
4
5
6
7
8
Lens Removal
Lens Removal
Sling Mount Installation
Sling Mount Installation
Fixture Suspension
Power Cord Installation
Power Cord Installation
Fixture Joining