
Signify North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Telephone 855-486-2216
Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone 800-668-9008
1/2-14 NPT
Side Conduit Entries
(2 places)
LED Module
Faceplate
Housing
Plug bottom conduit entries
(2 places)
Figure 1:
Loosen 4 screws to
remove faceplate.
Loosen 2 screws to
remove LED module.
Attached Ground Wire
*DO NOT REMOVE*
Figure 2:
*Factory pre-set switch level.
** Factory default CCT level.
Lumen Output Table
Switch
Output
Settings
RSC2
RSF2
RSS2
RSV2
Warm**
(3000K)
Cool
(4000K)
Warm**
(3000K)
Cool
(4000K)
Warm**
(3000K)
Cool
(4000K)
Warm**
(3000K)
Cool
(4000K)
9.2W (5)*
179
175
85
86
427
435
153
156
8.0W (4)
158
154
75
76
376
383
135
137
6.2W (3)
122
119
58
58
290
296
104
106
4.4W (2)
85
83
40
41
203
206
73
74
2.7W (1)
46
45
22
22
110
112
39
40
32001290, revision K
INSTALLATION INSTRUCTIONS:
LED STEPLYTE
page 1 of 2
SAFETY WARNING:
ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW TO COOL BEFORE
PERFORMING ANY MAINTENANCE, INCLUDING CLEANING!
To help prevent premature failure, decreased performance, overheating and risk of fire, keep fixture and lens
clean and free of leaves, mulch, debris and mineral deposits from water. The fixture and lens can be cleaned using
a soft cloth and a solution of mild liquid soap and warm water. Wipe clean and dry with a soft, lint-free dry cloth.
Avoid polishing fixture or lens.
This fixture is intended for installation in accordance with the National Electrical Code and local code
specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage
to the driver and void the warranty. These instructions do not purport to cover all details or variations in
equipment, nor to provide for every possible contingency related to installation, operation, maintenance,
or mounting situation. Should specific problems occur that are not addressed by these instructions, contact
your Sales Representative or distributor for assistance. SAVE THESE INSTRUCTIONS for future reference.