Page 2 of 3 P/N 443560815040 Rev C
STANDARD DRILL PATTERN
Ø3.50
”
or larger O.D.
3/8”
-
16
x
2
-
1/4”
Hex Head Bolt,
Split Lock Washer and Flat Washer
3/8
-
16”
Hex Nut
and Lock Washer
3/8”
-
16
x
2
-
1/4”
Hex Head Bolt,
Split Lock Washer and Flat Washer
Cage Nut
(4) #8
-
32 Arm Cover Screws
Square Pole
Optional Square Pole Adaptor
Bolster Plate
Wire Way
Hole
3/8
-
16 x
2.25”
Hex Bolt,
Split Lock Washer and Flat
Washer
Bolster Plate
Cage Nut
Fig. 1
Fig. 4
Fig. 3
Supply and Ground
Wires
TOP
BOTTOM
BOLSTER
PLATE
CAGE NUT
3/8
-
16 Nut
and Split
Lock Washer
Fig. 2
INSTALLATION INSTRUCTIONS
PowerForm Area/Site (PFAS)
-
Arm Mount (AR)
ALTERNATE DRILL PATTERN
Wire Tie
By Others
Wire Tie Boss
Round Pole
© 2018 Signify Holding. All rights reserved. This document contains information relating to the product portfolio
of Signify which information may be subject to change. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for any action in reliance thereon is
disclaimed. The information presented in this document is not intended as any commercial offer and does not
form part of any quotation or contract. All trademarks are owned by Signify Holding or their respective owners.
Signify North America Corporation
200 Franklin Square Drive
Somerset N.J. 08873, USA
Signify Canada Ltd./Signify Canada Ltée.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
