background image

 

Operating Manual

 

Thank you for purchasing this Icon Fires Burner. Icon Fires is very safety conscious and 
we have taken every care in designing, manufacturing and assembling your Icon 
Fires Burner to ensure it operates effectively, efficiently and safely. In return we ask 
that you exercise care when using this product and follow the instructions below. 
Before using your Icon Fires burner, please read all the information contained in this 
operation manual carefully. Icon Fires cannot be held responsible for any damage 
or injury caused if these instructions are not followed. 

IMPORTANT SAFEGUARDS

 

 Read all instructions and warnings before using this fireplace. 

WARNING 

 

DO NOT OVERFILL THE BURNER’S INTENDED CAPACITY. 

 

DO NOT INSTALL INTO AN AREA WHERE THERE IS A DRAFT WHICH CAN AFFECT THE 
FLAME. ESPECIALLY WHEN INSTALLING IN OLD HEARTHS, MAKE SURE HEARTH IS 
SEALED. 

 

USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED. 

 

DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING. 

 

PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES. 

 

DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER. 

 

NEVER POSITION THE BURNER WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE 
MOVED/BUMPED BY ACCIDENT, OR BLOWN BY THE WIND. e.g CURTAINS & BLANKETS  

 

ONLY USE THE SLIMLINE BURNER IN AREAS WITH GOOD VENTILATION. 

 

DO NOT COVER THE SLIMLINE BURNER VENT WITH ANY DECORATIVE ITEMS WHETHER 
THEY ARE COMBUSTIBLE OR NON COMBUSTIBLE , INCLUDING BUT NOT LIMITED TO 
ARTIFICIAL LOGS, STONES, PEBBLES, GLASS BEADS etc.  

CAUTION 

 

Make sure you have read and understood this manual before using this product. 

 

Do not overfill or spill fuel when refilling. 

 

If fuel is spilled, wipe with a dry cloth and allow the rest to evaporate before 
introducing a flame to the burner. 

 

If the burner is accidentally overfilled, follow the steps given in these next pages. 

 

To refill, wait until the burner is at the room temperature after the flame has been 
turned off. NOTE: the flame may not be visible to the naked eye in daylight. 

 

Never refill over or near an open flame. 

 

Use the supplied funnel or pump to refill. 

 

Remove all plastic & packaging before using the burner. 
 

 

Summary of Contents for BF023













Reviews: