II. Product Introduction
This product is a high-resolution 30-frame (1280*960) remote video surveillance clock, with an external
Micro SD Card. As a multifunctional high-tech product, the product is available multiple functions, such as:
video, sound recording, induction video, take a photo, cyber chat, electric alarm clock and file storage;
with the high-capacity battery, it can last recording for about 12 hours continuously and audio recording for
25 hours continuously; besides, the product can replace the high-resolution video with 2 million pixels,
sound and file automatically, Meanwhile, the product is designed the multiple languages for telling the
time. It supports 32GB storage. Its Micro SD card can be used for a long time and remote controller can
be easy to handle. With the best imperceptibility, this product will be as your ideal assistant to prevent
theft and get evidence.
III. Handling Instructions
1. Open the rotational cover at the right side, insert the Micro SD card and turn “ON” to get ready.
2. Use the remote controller to aim to the receiver of the clock and press "
" to start. When the blue lamp
is on and the clock is under the stand by mode.
3. Press to start recording video. After the blue lamp flashes 3 times and then turns off, it start recording.
stop pressing
, it will save the video file and return to the “holding state” , and the blue lamp will be on
(the default time length for video recorded is 20 minutes).
4. Press button to start recording a sound; after the blue lamp flashes 3 times and turns off, it will be put
into the working order; Press
again, it will save the sound file and return to the “holding state” , and
the blue lamp will be on (the default time length for sound recorded is 20 minutes);
5. Press button to get in photo taking mode. It will take a photo if pressing this button again. When
pressing this button, the blue lamp will flash; after taking the photo, it will return to the stand by.
6. Press button to get in motion detection mode, then the blue lamp will flash quickly. If a moving object
is detected, the blue lamp will flash slowly by two times and the device will be start to record video. If there
is no moving object to be detected, the blue lamp will return to “Quick-flash: and get in motion detection
mode (the default length for the video file is 3 minutes);
7. Press button, it will turn the device off and the blue lamp will be off.
8. When the switch is “ON”, insert the USB cable and then press
button on the remote controller, the
device will access to the U-disc mode.
9. PC camera function: Please install the driver software which is saved in the Compact Disc before
operating; Turn on the device by pressing
on the remote controller when the device is under the mode
of “ON”, insert USB cable to connect the computer; at this time, it will access to PC CAM mode;
10. Charging: Place the chief switch to “OFF” position, insert USB adapter, and the red lamp will be on; When
it is full, the red lamp will be off. You can charge it too by connect this device to a computer (
Please
use only the adapter provided with the device together; if the device getting hot or occurs other
unexpected situations whilst charging, please disconnect the adapter's power source);
11. Reset: If the product stops working under illegal operation or other unclear reasons, please place the
switch of the device to “OFF” position, and then to “ON” position. It will reset the product accordingly;
12. When the battery is low capacity, the blue lamp will keep flashing or the screen display will be unclear.
Then please charge it immediately. If it is used off, the file will be saved automatically;
13. Recorder date: Run the writertime file( in CD disc) when the camera connect with computer. And then ,the
video time is the same computer.
14. File update: please install “Network Installer” from the installation disc; use the remote controller to open
the clock, and then insert the USB cable in 10 seconds; afterwards, the computer will open an interface
automatically; click “Program Upgrade”, it will open a dialogue box; afterwards click “Update”.
When
①
DRAM Timing, select 0X35
When
②
DRAM Size, select “8M”; afterwards, press “OK” to upgrade; several minutes later, press
“Confirm” button.
15. When the program is lost, please install the software which is saved in the Compact Disc, and then click
“STK02NU Programme Upgrading Tool”, afterwards click “Update”;
Under DRAM Timing, select 0X35
Under DRAM Size, select “8M”; afterwards, press “OK” to upgrade; several minutes later, press
“Confirm” button.
