Georg Fischer Signet LLC, 3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057
For Worldwide Sales and Service, visit our website: www.gfsignet.com • Or call (in the U.S.): (800) 854-4090
For the most up-to-date information, please refer to our website at www.gfsignet.com
3-8059.090 Rev. G 03/13 English
© Georg Fischer Signet LLC 2013
6. Operation
S
3
L Terminals
•
Connect “input” directly to the S
3
L instrument.
•
Connect an S
3
L sensor to “pass-thru” for convenience.
Indicator LEDs
DATA
On when S
3
L serial data is transmitted,
or when a relay is in TEST mode.
POWER
On when input power is connected to 8059
Relay A
On when Relay A is energized
Relay B
On when Relay B is energized
Relay C
On when Relay C is energized
Relay D
On when Relay D is energized
Test Buttons
Test A
Press to manually control Relay A
Test B
Press to manually control Relay B
Test C
Press to manually control Relay C
Test D
Press to manually control Relay D
NC COM NO
RELAY A
NC COM NO
RELAY B
NC COM NO
RELAY C
NC COM NO
RELAY D
DC OUTPUT
+ -
DC INPUT
- +
+
S
3
L
-
+
S
3
L
-
INPUT
PASS-THRU
COM
POWER
Signet 3-8059 Relay Module
Test A
Test B
Test C
Test D
Relay A
Relay B
Relay C
Relay D
LISTED
E171559
®
Relays
The 250V/5A dry-contact relays are controlled via the serial
connection to the instrument. Use NO (normally open), COM
(common) and NC (normally closed) to control external
equipment.
Normal Operation:
•
Green COM LED fl ickering rapidly.
•
Both relays are controlled by the host instrument.
8. Ordering
Information
3-8059-4
159 000 772
External 4-Relay Module
3-8059-4AC
159 000 773
External 4-Relay Module with power supply
3-8050.396
159 000 617
RC Filter Kit
6205-0002
159 000 858
DIN Rail, 1m
6205-0003
159 000 859
End Clips, DIN Rail
NC C NO
RELAY A
NC C NO
RELAY B
NC C NO
RELAY C
NC C NO
RELAY D
+
S
3
L
-
+
S
3
L
-
OUTPUT 24VDC
+ -
AC INPUT
INPUT
PASS-THRU
L N
COM
POWER
Signet 3-8059 Relay Module
Test A
Test B
Test C
Test D
Relay A
Relay B
Relay C
Relay D
LISTED
E171559
®
7. Relay
Test
NOTE:
The 8059 will automatically return to normal operation if no buttons are pressed for 5 minutes.
8059-4
8059-4AC
Action
8059 Response
Press and hold TEST button for 5 seconds (until
green DATA LED begins to blink slowly)
• The selected relay is now controlled by the TEST button.
• Pressing the other relay TEST button has no effect.
Momentarily press TEST button to toggle relay.
• The red RELAY LED will toggle to indicate relay condition.
To return relay to Normal Operation:
Press and hold the TEST button for 5 seconds
(until green DATA light begins to fl icker rapidly)
• The relay returns to active status, controlled by the host
instrument.
