Turn no/off switch
Bluetooth off
Bluetooth on
Sleep mode: transport sleep mode, press this button during
transportation or storage to make the lamp enter sleep state
SOS: light will be flashing
In the test mode, it will be on during the day or at night.
It will be on for 20 seconds according to 100%, 50% and 30%,
and then exit the test mode and return to the working mode
Time setting, timed working 6 hours, 8 hours, 10 hours, cycle switching
Timed working 6 hours
Timed working 8 hours
Timed working 10 hours
Remote control and activation of product
Light ON
Light OFF
Increase brightness
Decrease brightness
SLS-012
Adaptive remote
control device
(optional)
SLS-020/030/040
daptive remote
control device
(optional)
SLS-050/060/080/100 uses a physical button switch
to turn on or off the light. Use the matching fake finger
to press the button switch at the mark. You can also use
other sharp objects to press. After pressing,
the indicator light will be lit, and the light will flash during
the system start-up. After that, the light goes out and enters
the working mode, press it again to enter the sleep mode,
please set the button to OFF during transportation or storage.
After the product installation is completed,
the solar PV panel will be activated after being exposed to sunlight.