03
L-1122,18-V1.0
Installation
First, if you have a connector of LED strip, please check whether your connector can match with the LED strip or not,
such as the width and distance of bonding pad of LED strip, etc.
Check whether your power supply is turned off or not, do not operate or install the connector with the power supply
on.
As shown on Figure 1, if the LED strip has to be cut for connection, please cut upon the scissors mark.
How to connect LED strips: as shown on figure 2, insert the LED strip into the connector until it reaches the end,
then fasten the screws with screwdriver and the installation of this side is completed. When installing another side,
please check whether the positive and negative polarity of LED strip is put accordingly.
How to connect wire rod with LED strip: first, insert the wire rod into the end with clips of connector and the layer of
wire rod shall be stripped off; fasten the screws with screwdriver; then insert the LED strip into another end with
screws of connector until it reaches the end and check whether the positive and negative polarity of wire rod and
LED strip is put accordingly; fasten the screws. Finally, the installation is completed.
