7. Place the lower door on a smooth surface
with its panel upwards. Loose screws
③
,
detach part
②
and part
①
. Turn part
①
by 180°
and then install part
①
and part
②
to
corresponding position on left side together
with screws
③
.
8. Change screw hole covers on middle cover
plate from left to right(as shown in figure
below).
9. Place refrigeration flat, remove part
②
and
then loose screws
④
. Remove part
①
and part
③
.
10. Screw out lower hinge. Change it to the
near hole site, and then screw up and mount
washer.
11. Just remount to the step 9. Change part
①
and part
②
to left and then fix them with
screws
④
. Change part
③
to right, and install it.
1
2
3
Lower hinge part (right)
Leg front
(
right
)
Leg front
(
left
)
Self-tapping-screws
Step 7
Step 8
Step 9
Lower hinge part (left)
Step 11
-50-
