Signature Kitchen Suite SKSUD2402P, Owner'S Manual

Page: 20 / 84

20 TROUBLESHOOTING
Parts & Features
Interior moisture
buildup.
Doors are opened often or for long periods of time.
• When the doors are opened often or for long periods of time, warm, humid air enters the
compartment. This raises the temperature and moisture level within the compartment. To
lessen the effect, reduce the frequency and duration of door openings.
Doors are not closed correctly.
• See the "Doors will not close correctly or pop open" section.
Weather is humid.
• Humid weather allows additional moisture to enter the compartments when the doors are
opened leading to condensation or frost. Maintaining a reasonable level of humidity in the
home will help to control the amount of moisture that can enter the compartments.
Refrigerator or
Freezer section is too
cold.
Incorrect temperature control settings.
• If the temperature is too cold, adjust the control one increment at a time and wait for the
temperature to stabilize. Refer to the Control Panel for more information.
Refrigerator is too
warm.
Refrigerator was recently installed.
• It may take up to 24 hours for each compartment to reach the desired temperature.
The air vents are blocked.
• Locate air vents by using your hand to sense airflow and move all packages that block
vents and restrict airflow. Rearrange items to allow air to flow throughout the
compartment.
Doors are opened often or for long periods of time.
• When the doors are opened often or for long periods of time, warm, humid air enters the
compartment. This raises the temperature and moisture level within the compartment. To
lessen the effect, reduce the frequency and duration of door openings.
Unit is installed in a hot location.
• The refrigerator should not be operated in temperatures above 100 °F (38 °C).
A large amount of wine bottles were added to the refrigerator at once.
• Adding wine bottles warms the refrigerator, requiring the cooling system to run.
Doors are not closed correctly.
• See the "Doors will not close correctly or pop open" section in the Troubleshooting.
Temperature control is not set correctly.
• If the temperature is too warm, adjust the control one increment at a time and wait for the
temperature to stabilize.
Problem Possible Cause & Solution
Problem Possible Cause & Solution
Doors will not close
correctly or pop
open.
The doors were removed during product installation and not properly replaced.
• Remove and replace the doors according to the installation instructions.
Refrigerator is not leveled properly.
• See Door Alignment in the installation instructions to level refrigerator.
us_main.book.book Page 20 Tuesday, May 25, 2021 10:26 AM