23
TROUBLESHOOTING
ENGLISH
Cooling
Problem
Possible Cause
Solutions
Interior moisture
buildup.
Doors are opened often or
for long periods of time.
When the doors are opened often or for long periods
of time, warm, humid air enters the compartment. This
raises the temperature and moisture level within the
compartment. To lessen the effect, reduce the
frequency and duration of door openings.
Doors are not closed
correctly.
See the "Doors will not close correctly or pop open"
section.
Weather is humid.
Humid weather allows additional moisture to enter the
compartments when the doors are opened, leading to
condensation or frost. Maintaining a reasonable level
of humidity in the home will help to control the amount
of moisture that can enter the compartments.
Refrigerator is too
warm.
Refrigerator was recently
installed.
It may take up to 24 hours for each compartment to
reach the desired temperature.
The air vents are blocked.
Locate air vents by using your hand to sense airflow
and move all bottles that block vents and restrict
airflow. Rearrange bottles to allow air to flow
throughout the compartment.
Refrigerator is too
warm.
Doors are opened often or
for long periods of time.
When the doors are opened often or for long periods
of time, warm, humid air enters the compartment. This
raises the temperature and moisture level within the
compartment. To lessen the effect, reduce the
frequency and duration of door openings.
Unit is installed in a hot
location.
The refrigerator should not be operated in
temperatures above 100 °F/38 °C.
Many wine bottles were
added to the refrigerator at
once.
Adding wine bottles warms the refrigerator, requiring
the cooling system to run.
Doors not closed correctly.
See the “Doors will not close correctly or pop open”
section in Parts & Features Troubleshooting.
Temperature control is not
set correctly.
If the temperature is too warm, adjust the control one
increment at a time and wait for the temperature to
stabilize.
Refrigerator is too
cold.
Incorrect temperature control
settings.
If the temperature is too cold, adjust the control one
increment at a time and wait for the temperature to
stabilize. Refer to the Control Panel for more
information.
Summary of Contents for SKSCW181 Series
Page 91: ...31 MEMORÁNDUM MEMORÁNDUM ...
