Signature Kitchen Suite SKSCF1801P, Installation Manual, Page: 7 / 148

7
EN
G
LIS
H
Enclosure
Floor
• The panel above the appliance must be made from a solid material (not MDF) that is at
least 5/8" (16 mm) thick.
• The front 4 inches (100 mm) of the interior surface (furniture return) will be visible when
• Above all, the enclosure cannot be out of square. Use a spirit level or measure the
diagonals of the opening to make sure corners are square.
• The appliance is attached at the sides and the top to either the enclosure or to adjacent
cabinets. Make sure the enclosure or the adjacent cabinets are securely connected to the
WARNING
performance.
• Do not install the appliance on a platform or raised structure.
• The structure underneath the appliance must be able to support the weight of the appliance
• For best performance and to avoid leakage, level the appliance.
Electrical Requirements
WARNING
Electrical Shock Hazard
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
Follow all state and local codes or NEC.
The appliance comes with a UL listed 3 wire power supply cord.
The appliance requires a 3-wire receptacle.
The receptacle must be installed by a licensed electrician only.