background image

1

Victorian Door Knob & Plate Set Installation Instructions

VICTORIAN DOOR KNOB AND PLATE SET

INSTALLATION INSTRUCTIONS

Before you begin, read the installation instructions below. Observe all local building and safety codes. For the following 

installation instructions it is assumed that holes for the handle and lock set are pre-drilled.

Unpack and inspect the product for any shipping damages and ensure that none of the required pieces are missing. If 

you find damages, do not install. Contact Customer Service at 1.866.855.2284. If you need assistance or have questions 

while installing your door handle and plate set, contact Customer Service.

We recommend consulting a professional if you are unfamiliar with installing hardware fixtures. Signature Hardware 

accepts no liability for any damage to the handle, lock set, or door, or for personal injury during installation.

TOOLS AND MATERIALS:

Pencil

Screwdriver

Wood Chisel

Drill 

DUMMY SET INSTALLATION

1.  Remove the set screws on the door knobs (

B

) with the 

Allen wrench provided (

C

) to disconnect the knobs. 

2.  Position the dummy spindle (E) in the desired 

 

mounting location.

3.  Mark the mounting hole locations on the door.

4.  Drill pilot holes with the appropriate drill bit for your

 installation.

 

5.  Secure the spindle to the door with the provided wood

 

screws (D).

6.  Thread the decorative escutcheon (A) onto the 

 

dummy spindle. Secure to the door with screws. 

 

7.  Thread the door knob (B) onto the dummy spindle. 

 

8.  Place a set screw  in the set screw hole on the side

 

of the door knob. Use the provided Allen wrench (C) to

 secure.

A

B

C

D

E

Reviews: