background image

22

Island Mount Range Hood Installation Instructions

WARRANTY

To obtain service under warranty you must present proof of the original purchase date. Please provide an original 

dated proof of purchase (sales receipt/invoice) in order to obtain service under warranty.

5 Year Parts Warranty

:

For five years from the date of original purchase, your local reseller will provide free of charge, non-consumable re

-

placement parts or components that failed due to manufacturing defects. Subject to the conditions and limitations set 

forth below, your local reseller will, at its option, either repair or replace any part of its products that prove defective 

by reason of improper workmanship or materials. Repaired parts or replacement products will be provided by your 

local reseller on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. The 

consumer is responsible for all shipping costs. Consumable parts not covered by this warranty include but not limited 

to: Light bulbs, metal, aluminum and charcoal filters.

Who is Covered

:

This warranty is extended to the original purchaser for products purchased for ordinary home use.

This Warranty Will Be Voided When

:

Product damaged through negligence, improper installation, accident, abuse, misuse, natural disaster, insufficient or

excessive electrical supply, abnormal mechanical or environmental conditions, or any unauthorized disassembly, 

repair, modification, or failure to follow installation instructions. When product is used commercially or other than its 

intended purpose, damaged because of improper connection with equipment of other manufacturers, or repaired or 

modified by anyone other than your local reseller’s authorized agents. This limited warranty also does not apply to 

any product on which the original identification information has been altered, obliterated or removed, has not been 

handled or packaged correctly or has been sold as second-hand.

What is Not Covered

:

Consumable parts such as light bulbs, metal and charcoal filters. The natural wear of finish, and wear due to improp

-

er maintenance, use of corrosive and abrasive cleaning products, pads, and oven cleaner products. Chips, dents or 

cracks due to abuse, misuse, freight damage, or improper installation. Damage of product caused by accident, fire, 

floods or act of God. The manufacturer and/or distributor/reseller is not liable for, and does not cover under warran

-

ty, any loss of properties or any costs associated with removing, servicing, installing, or determining the source of 

problems with this product.

This warranty is valid in the country of the original purchase at retail. It is non-transferable and applies only to the 

original purchaser and does not extend to subsequent owners of this product. Any applicable implied warranties, 

including the war ranty of merchantability, are limited in duration to a period of express warranty as provided herein 

beginning with the date of original purchase at retail and, no warranties, whether express or implied, shall apply to 

this product thereafter.

Summary of Contents for Island Mount Range Hood
























Reviews: