3
Freestanding Tub Faucet Set Installation Instructions
DRAIN INSTALLATION
Note
: Because tubs vary in size, measure your space
thoroughly before installation. Trim pipes accordingly to
ensure a correct fit. Go to the
Trimming Drain Pipes
section for more information.
1. Apply thread sealant or plumber’s tape to the threads
at each end of all pipes prior to installation. If two pipes
arrive attached, be sure to take them apart and apply
sealant before installing.
2. Connect the tub shoe assembly (
A
), and rubber washer to
the tub drain (
B
).
3. Install the overflow assembly (
C
) with the beveled washer,
overflow plate, mounting screw (provided) and any other
washers or rubber sealing gaskets included.
4. Attach the waste and overflow tee (
D
) to the overflow
assembly (
C
) and shoe assembly (
A
) with sealing
washers and slip nuts.
5. Attach the drain tube and flange (
E
) to the waste and
overflow tee (
D
) with the sealing washer and slip nut.
A
C
D
E
B
Press and Seal Swivel Drain
Press and Seal Swivel Drain
TRIMMING DRAIN PIPES
1. Connect the overflow and drain assemblies and pipes to
the tub.
2. The T-connection will be attached at the points where the
drain pipes intersect. Measure and mark each pipe so
that the ends reach a little over halfway into the
T-Connection hubs.
3. Trim the pipes as necessary with a hack saw with a
blade that is suitable for cutting metal.