1
Freestanding Tub Faucet Set Installation Instructions
FREESTANDING TUB FAUCET SET
Before you begin, read the installation instructions below. Observe all local plumbing and building codes.
Caution
: Do not grab or hold on to faucet or risers for support.
Unpack and inspect for any shipping damages. If any damage is found, contact Customer Service at 1-866-855-2284. If
you need assistance while installing your new faucet set, call our Customer Service number.
Your application and circumstances may call for variations to the installation instructions. We recommend consulting a
professional if you are unfamiliar with installing bathroom fixtures and plumbing. Signature Hardware accepts no liability
for any damage to the floor, walls, plumbing, or personal injury during installation.
For the following installation instructions for your new faucet set it is assumed that the water supply lines are in place
underneath the floor and are directly accessible for installation
TOOLS AND MATERIALS:
Adjustable Wrench
Damp Cloth
FAUCET INSTALLATION
1. Thread the bell flanges (
F
), lock nuts (
G
), and rubber
washers (
H
) onto the lower riser pipes (
E
). Insert the lower
riser pipes into the installation holes in the finished floor.
Note
: Apply the supplied thread sealant to all threaded
connections. Wipe away any excess sealant with a damp
cloth.
2. Thread the metal washers (
I
), and locknuts (
J
) onto the lower
riser pipes via the under the floor access space. Connect the
lower riser pipes to the main water supply with the rubber
washers (
K
) and NPT adapters (
L
).
3. Above the floor, apply thread sealant to the riser threads
and connect the shutoff valves (
D
). Wipe away any excess
sealant with a damp cloth.
4. Slide the slip nuts (
B
) up the upper riser pipes (
C
).
5. Wrap plumber's tape around the threads on the bottom of the
upper riser pipes and thread into the shutoff valves.
6. Place the remaining rubber washers (
A
) in the slip nuts at
the top of the supply pipes.
Floor
Bell Flange
Lock Nut
Rubber Washer
Metal Washer
Rubber Washer
Lock Nut
NPT Adapter
Lug ells or drop eared 90°
(Not included)
Support Mounted Between Floor Joists
Pliers
Screwdrivers (Phillips and Flat Head)
Hacksaw
Pipe Wrench
Thread Sealant or Plumber’s Tape