3
Ferguson Corner Shower Tray Installation Instructions
7. Once the drain is connected, plug the drain and fill the base with a small amount of water.
8. Check for any leakage around the drain (some bubbles may appear) and below (if access is available).
9. Unplug the drain and assure that the drainage is efficient. There should be no water puddling in the tray.
10. Drill pilot holes and attach the shower tray to the wall with 1-¼ " stainless steel screws.
11. Run a bead of silicone sealant along the top and base of the shower tray. Allow sealant to dry 24 hours before use.
