Chapter 17
| Spanning Tree Commands
– 422 –
same set of VLANs. Also, note that RSTP treats each MSTI region as a
single node, connecting all regions to the Common Spanning Tree.
Example
Console(config-mstp)#mst 1 vlan 2-5
Console(config-mstp)#
name
This command configures the name for the multiple spanning tree region in
which this switch is located. Use the
no
form to clear the name.
Syntax
name
name
name
- Name of multiple spanning tree region. (Range: 1-32
alphanumeric characters)
Default Setting
Switch’s MAC address
Command Mode
MST Configuration
Command Usage
The MST region name and revision number (
) are used to designate
a unique MST region. A bridge (i.e., spanning-tree compliant device such as
this switch) can only belong to one MST region. And all bridges in the same
region must be configured with the same MST instances.
Example
Console(config-mstp)#name R&D
Console(config-mstp)#
Related Commands
revision
This command configures the revision number for this multiple spanning tree
configuration of this switch. Use the
no
form to restore the default.
Syntax
revision
number
number
- Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
