Chapter 10
| Access Control Lists
IPv4 ACLs
– 323 –
Command Mode
Interface Configuration (Ethernet)
Command Usage
If an ACL is already bound to a port and you bind a different ACL to it, the
switch will replace the old binding with the new one.
Example
Console(config)#int eth 1/2
Console(config-if)#ip access-group david in
Console(config-if)#
Related Commands
show ip access-list (323)
Time Range (145)
show ip access-group
This command shows the ports assigned to IP ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IP access-list david in
Console#
show ip access-list
This command displays the rules for configured IPv4 ACLs.
Syntax
show ip access-list
{
standard
|
extended
} [
acl-name
]
standard
– Specifies a standard IP ACL.
extended
– Specifies an extended IP ACL.
acl-name
– Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
