Chapter 8
| Authentication Commands
AAA
– 214 –
Default Setting
None
Command Mode
Interface Configuration
Example
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting
commands
This command applies an accounting method to entered CLI commands. Use
the
no
form to disable accounting for entered CLI commands.
Syntax
accounting commands
level
{
default
|
list-name
}
no accounting commands
level
level
- The privilege level for executing commands. (Range: 0-15)
default
- Specifies the default method list created with the
list-name -
Specifies a method list created with the
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting commands 15 default
Console(config-line)#
accounting exec
This command applies an accounting method to local console, Telnet or SSH
connections. Use the
no
form to disable accounting on the line.
Syntax
accounting exec
{
default
|
list-name
}
no accounting exec
default
- Specifies the default method list created with the
command.
